Guía Lab Frame-Relay sobre GNS3 - Router Cisco

[mariano]

Lab Frame-Relay sobre GNS3

Primero armar una topologia como muestra el grafico:


Configuracion del dispositivo Frame-Relay:

Configurarlo igual que en la siguiente imagen:



Configuracion de los 3 Routers:

Router1

Router(config)# interface Serial0/0
Router(config-if)# no ip address
Router(config-if)# encapsulation frame-relay

Router(config)# interface Serial0/0.1 point-to-point
Router(config-if)# ip address 192.168.100.1 255.255.255.252
Router(config-if)# frame-relay interface-dlci 101   

Router(config)# interface Serial0/0.2 point-to-point
Router(config-if)# ip address 192.168.100.5 255.255.255.252
Router(config-if)# frame-relay interface-dlci 102

Router2

Router(config)# interface Serial0/0
Router(config-if)# no ip address
Router(config-if)# encapsulation frame-relay

Router(config)# interface Serial0/0.1 point-to-point
Router(config-if)# ip address 192.168.100.2 255.255.255.252
Router(config-if)# frame-relay interface-dlci 202

Router3

Router(config)# interface Serial0/0
Router(config-if)# no ip address
Router(config-if)# encapsulation frame-relay
      
Router(config)# interface Serial0/0.1 point-to-point
Router(config-if)# ip address 192.168.100.6 255.255.255.252
Router(config-if)# frame-relay interface-dlci 203

Esta es una guia basica de Frame-Relay pero es bastante clara. La arme usando una que encontre que me gusto.
Espero que les sirva.
Salu2